Error Codes: Unterschied zwischen den Versionen
K (→LCD Symptome) |
|||
(23 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt) | |||
Zeile 17: | Zeile 17: | ||
|One long and two short beeps, and a blank or unreadable LCD. | |One long and two short beeps, and a blank or unreadable LCD. | ||
|1. System board. <br> | |1. System board. <br> | ||
2. LCD assembly. | 2. LCD assembly. <br> | ||
3.DIMM. | 3.DIMM. | ||
|[http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T61p-exhibiting-1-long-and-2-short-beep-and-black-screen/td-p/223574 nVidia Bug bei T61/R61] | |[http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T61p-exhibiting-1-long-and-2-short-beep-and-black-screen/td-p/223574 nVidia Bug bei T61/R61] | ||
Zeile 31: | Zeile 31: | ||
|- | |- | ||
|Three short beeps, pause, three more short beeps, and one short beep. <br> | |Three short beeps, pause, three more short beeps, and one short beep. <br> | ||
One short beep, pause, three short beeps, pause, three more short beeps, and one short beep. | One short beep, pause, three short beeps, pause, three more short beeps, and one short beep.<br> | ||
One short beep, pause, three short beeps, pause, four more short beeps, and three short beeps. | |||
|1. DIMM. <br> | |1. DIMM. <br> | ||
2. System board | 2. System board | ||
Zeile 38: | Zeile 39: | ||
|Only the cursor appears. | |Only the cursor appears. | ||
|Reinstall the operating system. | |Reinstall the operating system. | ||
| | |[[Fehlersuche_bei_ThinkPads#HDD_bootet_nach_Klonen_nicht.2C_nur_blinkender_Cursor_links_oben_sichtbar|Fehler beim Klonen]] | ||
|- | |- | ||
|Four cycles of four short beeps and a blank screen. | |Four cycles of four short beeps and a blank screen. | ||
Zeile 47: | Zeile 48: | ||
|System board | |System board | ||
| | | | ||
|- | |||
!colspan="3"| Nach Einspielen eines "Custom-/Mod-BIOS" | |||
|- | |||
|Two cycles of five short beeps but boots then. | |||
|Security chip does not like Custom-BIOS | |||
|[http://thinkpad-forum.de/threads/162420-gel%F6st-x201-custom-BIOS-WL-entfernt Disable security chip in BIOS] | |||
|} | |} | ||
<br><br> | <br><br> | ||
Zeile 112: | Zeile 119: | ||
Restore it from a recovery CD | Restore it from a recovery CD | ||
| | | | ||
|- | |||
|System Security - Bottom cover tamper detected und verlangt ein Passwort | |||
| | |||
|Lösung: Das Kennwort wird vom System selbst gesetzt und lautet "lenovo" | |||
Durch Eingabe des Kennwort kann man das tamper detected im BIOS deaktivieren. | |||
|} | |} | ||
<br><br> | <br><br> | ||
== Numerische Fehler Codes == | == Numerische Fehler Codes == | ||
=== Errorcodes Bereich 0xxx === | |||
{| class="wikitable" | {| class="wikitable" | ||
! Error code | ! Error code | ||
Zeile 160: | Zeile 172: | ||
|Invalid RFID Serialization Information Area. | |Invalid RFID Serialization Information Area. | ||
|System board. | |System board. | ||
| | |[http://thinkpad-forum.de/threads/154608-0188-Error-Fehlercode-beim-T60 Lösung] | ||
|- | |- | ||
|0189 | |0189 | ||
|Invalid RFID configuration information area-The EEPROM checksum is not correct. | |Invalid RFID configuration information area-The EEPROM checksum is not correct. | ||
|System board. | |System board. | ||
| | |[http://thinkpad-forum.de/threads/92985-L%C3%B6sung-X32-Bios-Error-0189 Lösung] | ||
|- | |- | ||
|0190 | |0190 | ||
Zeile 269: | Zeile 281: | ||
|Password checksum bad-The password is cleared. | |Password checksum bad-The password is cleared. | ||
|Reset the password by running BIOS Setup Utility. | |Reset the password by running BIOS Setup Utility. | ||
| | |||
|- | |||
|0254 | |||
|System NV7 Volume checksum bad- Default configuration used (two short beeps) | |||
|Turn off the computer and discharge CMOS. Then restart the computer. | |||
| | | | ||
|- | |- | ||
Zeile 335: | Zeile 352: | ||
# System board. | # System board. | ||
| | | | ||
|} | |||
=== Errorcodes Bereich 1xxx === | |||
{| class="wikitable" | |||
! Error code | |||
! Symptom | |||
! FRU or action, in sequence | |||
! Siehe auch | |||
|- | |- | ||
|1802 | |1802 | ||
Zeile 375: | Zeile 399: | ||
'''Note''': For the construction of the DIMM slot, see DIMM removal and installation - ThinkPad T400, R400. | '''Note''': For the construction of the DIMM slot, see DIMM removal and installation - ThinkPad T400, R400. | ||
| | | | ||
|} | |||
=== Errorcodes Bereich 2xxx === | |||
{| class="wikitable" | |||
! Error code | |||
! Symptom | |||
! FRU or action, in sequence | |||
! Siehe auch | |||
|- | |- | ||
|2000 | |2000 | ||
Zeile 422: | Zeile 453: | ||
|} | |} | ||
<br><br> | <br><br> | ||
== Symptome ohne Piepton == | == Symptome ohne Piepton == | ||
Zeile 496: | Zeile 526: | ||
<sup>1)</sup> | <sup>1)</sup> | ||
Zitat aus dem Hardware Maintenance manual: | Zitat aus dem Hardware Maintenance manual: | ||
:A bright dot means a pixel is always on (white or color.) A dark dot means a pixel is always off (black color.) | |||
<br><br> | |||
== Numerische Fehlercodes (ThinkPads vor 2001) == | |||
{| class="wikitable" | |||
! Symptom or error | |||
! FRU or action, in sequence | |||
! Siehe auch | |||
|- | |||
|10X | |||
101: Interrupt failure.<br> | |||
102: Timer failure.<br> | |||
103: Timer interrupt failure.<br> | |||
104: Protected mode failure.<br> | |||
105: Last 8042 command not accepted.<br> | |||
107: NMI test failure.<br> | |||
108: Timer bus test failure.<br> | |||
109: Low meg-chip select test.<br> | |||
| | |||
# System board | |||
| | |||
|- | |||
|110<br> | |||
(Planar parity.) | |||
| | |||
# Go to “Memory Checkout” siehe rechte Spalte<br> | |||
# DIMM card<br> | |||
# Detach the expansion unit if it is attached to the computer.<br> | |||
# System board<br> | |||
| [https://download.lenovo.com/eol/hmm_notebook.html Hardware Maintenance Manual] | |||
|- | |||
| | |||
111<br> | |||
(I/O parity.) | |||
| | |||
# Go to “Memory Checkout” siehe rechte Spalte | |||
# Expansion unit or port replicator. | |||
# System board | |||
|[https://download.lenovo.com/eol/hmm_notebook.html Hardware Maintenance Manual] | |||
|- | |||
|11XX<br> | |||
1101: Serial_A test failure. | |||
| | |||
# Serial device | |||
# Communication cable | |||
# System board | |||
| | |||
|- | |||
|12XX<br> | |||
1201: Serial_B test failure. | |||
| | |||
# System board (infrared) | |||
| | |||
|- | |||
|158<br> | |||
(The hard disk password was not set even though the supervisor password is set.) | |||
|Set the password for the hard disk drive. | |||
| | |||
|- | |||
|159<br> | |||
(The hard disk password is not set the same as the supervisor password.) | |||
|Set the correct password for the hard disk drive. | |||
| | |||
|- | |||
|161<br> | |||
(Dead battery.) | |||
| | |||
# Go to “Checking the Backup Battery” <sup>1</sup>. | |||
# Backup battery | |||
# System board | |||
| | |||
|- | |||
|163<br> | |||
(Time and date were not set.) | |||
| | |||
# Set time and date. | |||
# System board | |||
| | |||
|- | |||
|173 <br> | |||
(Configuration data was lost.) | |||
| | |||
# Select OK in the error screen; then set the time and date. | |||
# Backup battery | |||
# System board | |||
| | |||
|- | |||
|174 <br> | |||
(Configuration error: Perform “Checking the Installed Devices List” (siehe rechte Spalte) before changing any FRUs.) | |||
| | |||
# Check device configuration. | |||
# Hard disk drive assembly | |||
# System board | |||
|[https://download.lenovo.com/eol/hmm_notebook.html Hardware Maintenance Manual] | |||
|- | |||
|175, 177, 178<br> | |||
175: EEPROM CRC #1 error.<br> | |||
177: Supervisor password check sum error.<br> | |||
178: EEPROM is not functional. | |||
| | |||
# System board | |||
| | |||
|- | |||
|17XX<br> | |||
1701: Hard disk controller failure.<br> | |||
1780, 1790: Hard disk 0 error.<br> | |||
1781, 1791: Hard disk 1 error. | |||
| | |||
# Hard disk drive<br> | |||
# System board | |||
| | |||
|- | |||
|183<br> | |||
(Incorrect password entered at the supervisor password prompt.) | |||
|Have the user examine the password. | |||
| | |||
|- | |||
|184<br> | |||
(Power-on password check sum error.) | |||
|Reset the power-on password in Easy-Setup. | |||
| | |||
|- | |||
|185<br> | |||
(The startup sequence is not valid. Suspect that power was off when the startup sequence was being updated.) | |||
|Reset the startup sequence in Easy-Setup. | |||
| | |||
|- | |||
|186 | |||
| System board | |||
| | |||
|- | |||
|188, 189<br> | |||
(BAD EEPROM CRC #1. An incorrect checksum of the EEPROM is received.) | |||
|System board | |||
| | |||
|- | |||
| | |||
190<br> | |||
(A depleted battery pack was installed when the power was on.) | |||
|Go to “Checking the Battery Pack” in Hardware Maintenance Manual. | |||
|[https://download.lenovo.com/eol/hmm_notebook.html Hardware Maintenance Manual] | |||
|- | |||
|191XX<br> | |||
(PM initialization error.) | |||
|System board | |||
| | |||
|- | |||
| | |||
192<br> | |||
(Fan error.) | |||
| | |||
# Measure the voltage of the backup battery. If the voltage is not correct, replace the backup battery. | |||
# Fan | |||
# System board | |||
| | |||
|- | |||
|193<br> | |||
(RF Antenna has been removed.) | |||
| | |||
# Type the correct Supervisor Password at the password prompt. | |||
# Reseat the RF Antenna to the HDD cover. | |||
| | |||
|- | |||
|194<br> | |||
(The computer is carried through the portal gate.) | |||
| | |||
Type the correct Supervisor Password at the password prompt. | |||
| | |||
|- | |||
|195<br> | |||
(The configuration read from the hibernation area does not match the actual configuration.) | |||
|Check if the configuration was changed. For example, check if the DIMM card is added. | |||
| | |||
|- | |||
|196<br> | |||
(A read error occurred in the hibernation area of the hard disk drive.) | |||
| | |||
# Run the hard disk drive test. | |||
# Hard disk drive | |||
| | |||
|- | |||
|199XX<br> | |||
(Resume error.) | |||
|System board | |||
| | |||
|- | |||
|1XX | |||
|System board | |||
| | |||
|- | |||
|2XX<br> | |||
201: Memory data error.<br> | |||
202: Memory line error 00–15. <br> | |||
203: Memory line error 16–23.<br> | |||
205: Memory test failure on on-board memory.<br> | |||
221: ROM to RAM remap error. | |||
| | |||
# Go to “Memory Checkout” - siehe rechts.<br> | |||
# DIMM card<br> | |||
# System board | |||
|[https://download.lenovo.com/eol/hmm_notebook.html Hardware Maintenance Manual] | |||
|- | |||
|225 (Unsupported memory module.) | |||
| | |||
# Check if the supported DIMM is installed. | |||
# DIMM card | |||
# System board | |||
| | |||
|- | |||
|301, 303, 304, 305, 3XX<br> | |||
(301: Keyboard error.) | |||
| | |||
# Go to “Keyboard or Auxiliary Input Device Checkout” -siehe rechts. | |||
# Keyboard | |||
# External numeric keypad | |||
# External keyboard | |||
# Keyboard/mouse cable | |||
# System board | |||
|[https://download.lenovo.com/eol/hmm_notebook.html Hardware Maintenance Manual] | |||
|- | |||
|601, 6XX<br> | |||
(601: Diskette drive or controller error.) | |||
| | |||
# Go to “Diskette Drive Checkout” - siehe rechts. | |||
# Diskette drive assembly | |||
# Diskette | |||
# System board | |||
|[https://download.lenovo.com/eol/hmm_notebook.html Hardware Maintenance Manual] | |||
|- | |||
|602<br> | |||
(Diskette read error.) | |||
| | |||
# Go to “Diskette Drive Checkout” - siehe rechts. | |||
# Diskette | |||
# Diskette drive assembly | |||
|[https://download.lenovo.com/eol/hmm_notebook.html Hardware Maintenance Manual] | |||
|- | |||
|604<br> | |||
(Unacceptable ID was read from the diskette drive.) | |||
| | |||
# Go to “Diskette Drive Checkout” - siehe rechts. | |||
# Diskette drive assembly | |||
# System board | |||
|[https://download.lenovo.com/eol/hmm_notebook.html Hardware Maintenance Manual] | |||
|- | |||
|2402 | |||
|TV Out Card | |||
| | |||
|- | |||
|24XX<br> | |||
(2401: System board video error.) | |||
|System board | |||
| | |||
|- | |||
|808X<br> | |||
8081: PCMCIA presence test failure. (PCMCIA revision number also checked.)<br> | |||
8082: PCMCIA register test failure. | |||
| | |||
# PC Card slot assembly | |||
# PCMCIA device | |||
# System board | |||
| | |||
|- | |||
|860X<br> | |||
(Pointing device error when TrackPoint is disabled.)<br> | |||
8601: System bus error–8042 mouse interface. | |||
8602: External mouse error.<br> | |||
8603: System bus error or mouse error. | |||
| | |||
# External mouse | |||
# External keyboard | |||
# System board | |||
| | |||
|- | |||
|861X<br> | |||
(Pointing device error when TrackPoint is enabled.)<br> | |||
8611: System bus error–I/F between 8042 and IPDC.<br> | |||
8612: TrackPoint error.<br> | |||
8613: System board or TrackPoint error. | |||
| | |||
# Reseat the keyboard cable on the sub card. | |||
# Keyboard | |||
# External mouse | |||
# Sub card | |||
# System board | |||
| | |||
|- | |||
|I9990301<br> | |||
I9990302<br> | |||
I9990305<br> | |||
I9990301: Hard disk error.<br> | |||
I9990302: Invalid hard disk boot record.<br> | |||
I9990305: No bootable device.<br> | |||
| | |||
# Check that the operating system is installed in the hard disk drive. If not, install the operating system. | |||
# Reseat the boot device. | |||
# Check the startup sequence for the correct boot device. | |||
# Check that the operating system has no failure and is installed correctly. | |||
| | |||
|- | |||
|I9990303<br> | |||
(Bank–2 flash ROM check sum error.) | |||
| | |||
System board Other codes not listed above.<br> | |||
Go to “Undetermined Problems” - siehe rechts. | |||
|[https://download.lenovo.com/eol/hmm_notebook.html Hardware Maintenance Manual] | |||
|} | |||
<br><br> | |||
== Undokumentierte Fehlercodes == | |||
{| class="wikitable" | |||
! Symptom or error | |||
! FRU or action, in sequence | |||
! Siehe auch | |||
|- | |||
|00127<br> | |||
Nach CPU-Upgrade (Thinkpad 600, 770 etc), kann das Bios den L2-Cache der CPU nicht initialisieren | |||
|BIOS "Hack" - siehe rechts | |||
| | |||
#[[770X#Error_127_beheben|Error 127 beheben]] | |||
#[[600E#Onboard-Speicher_abschalten|Onboard-RAM abschalten]] | |||
|} | |||
<br><br> | <br><br> | ||
== Weblinks == | == Weblinks == | ||
* siehe auch Wiki-Artikel [[Fehlersuche bei ThinkPads]] | |||
* [http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT002759 Numeric error codes - ThinkPad R400, T400] | * [http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT002759 Numeric error codes - ThinkPad R400, T400] | ||
* [http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=DJON-3LXQX8 Numeric error codes - ThinkPad 770] | * [http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=DJON-3LXQX8 Numeric error codes - ThinkPad 770] | ||
* [http:// | * [http://ps-2.kev009.com/pcpartnerinfo/ctstips/5056.htm Beep and no beep symptoms - ThinkPad 560X] | ||
* [http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT035729 Beep and no beep symptoms - ThinkPad General] | * [http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT035729 Beep and no beep symptoms - ThinkPad General] | ||
* [http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT005068 Beep and No beep symptoms - ThinkPad R500] | * [http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT005068 Beep and No beep symptoms - ThinkPad R500] | ||
* [http://www.comptechdoc.org/hardware/beepcodes/3.htm Phoenix BIOS beep codes] | * [http://www.comptechdoc.org/hardware/beepcodes/3.htm Phoenix BIOS beep codes] | ||
* [http://ps-2.kev009.com/pcpartnerinfo/ctstips/2c86.htm FRU-Codes am Beispiel ThinkPad 560x] | |||
[[Category:Fehlermeldung]] | [[Category:Fehlermeldung]] |
Version vom 3. Mai 2017, 15:28 Uhr
Piep Symptome
Symptom or error | FRU or action, in sequence | Siehe auch |
---|---|---|
One beep and a blank, unreadable, or flashing LCD. | 1. Reseat the LCD connector. 2. LCD assembly. |
|
One long and two short beeps, and a blank or unreadable LCD. | 1. System board. 2. LCD assembly. |
nVidia Bug bei T61/R61 |
Two short beeps with error codes. | POST error. | Numerische Fehler Codes |
Two short beeps and a blank screen. | 1. System board. 2. DIMM. |
RAM-Steckplatz bei T30, R3x, X3x |
Three short beeps, pause, three more short beeps, and one short beep. One short beep, pause, three short beeps, pause, three more short beeps, and one short beep. |
1. DIMM. 2. System board |
|
Only the cursor appears. | Reinstall the operating system. | Fehler beim Klonen |
Four cycles of four short beeps and a blank screen. | System board (security chip) | |
Five short beeps and a blank screen. | System board | |
Nach Einspielen eines "Custom-/Mod-BIOS" | ||
Two cycles of five short beeps but boots then. | Security chip does not like Custom-BIOS | Disable security chip in BIOS |
Fehlermeldungen
Symptom or error | FRU or action, in sequence | Siehe auch |
---|---|---|
Device address conflict. | 1. Load “Setup Defaults” in the BIOS Setup Utility. 2. Backup battery. |
|
Allocation error for device. | 1. Load “Setup Defaults” in the BIOS Setup Utility. 2. Backup battery. |
|
Failing bits: nnnn. | 1. DIMM. 2. System board. | |
Invalid system configuration data. | 1. DIMM. 2. System board. |
|
I/O device IRQ conflict. | 1. Load “Setup Defaults” in the BIOS Setup Utility. 2. Backup battery. |
|
Operating system not found. | 1. Check that the operating system has no failure and is installed correctly. 2. Enter the BIOS Setup Utility and see whether the hard disk drive and the diskette drive are properly identified. |
|
Hibernation error. | 1. Restore the system configuration to what it was before the computer entered hibernation mode. 2. If memory size has been changed, re-create the hibernation file. |
|
Fan error. | Fan. | |
Thermal sensing error. | System board. Fehlermeldung erscheint auch nach CPU-Upgrade z.B. bei T61 |
Thread im ThinkPad-Forum und T61 (Boardtausch) |
Authentication of system services failed. Press <Esc> to resume. | The Predesktop Area in the HDD is corrupted. Restore it from a recovery CD |
|
System Security - Bottom cover tamper detected und verlangt ein Passwort | Lösung: Das Kennwort wird vom System selbst gesetzt und lautet "lenovo"
Durch Eingabe des Kennwort kann man das tamper detected im BIOS deaktivieren. |
Numerische Fehler Codes
Errorcodes Bereich 0xxx
Error code | Symptom | FRU or action, in sequence | Siehe auch |
---|---|---|---|
0175 | Bad CRC1, stop POST task-The EEPROM checksum is not correct. | System board | siehe 0175: Bad CRC1 |
0176 | System Security-The system has been tampered with. |
|
|
0177 | Bad SVP data, stop POST task-The checksum of the supervisor password in the EEPROM is not correct. | System board. | |
0182 | Bad CRC2. Enter BIOS Setup and load Setup defaults.-The checksum of the CRS2 setting in the EEPROM is not correct. |
|
|
0185 | Bad startup sequence settings. Enter BIOS Setup and load Setup defaults. | Run BIOS Setup Utility. Press F9, and Enter to load the default setting. Then save the current setting by pressing F10. | |
0187 | EAIA data access error-The access to EEPROM is failed. | System board. | |
0188 | Invalid RFID Serialization Information Area. | System board. | Lösung |
0189 | Invalid RFID configuration information area-The EEPROM checksum is not correct. | System board. | Lösung |
0190 | Critical low-battery error. |
|
|
0191 | System Security-Invalid Remote Change requested. |
|
|
0192 | System Security- Embedded Security hardware tamper detected. | System board. | |
0199 | System Security-Security password retry count exceeded. |
|
|
01C8 | Two or more modem devices are found. Remove all but one of them. Press ESC to continue. |
|
|
01C9 | More than one Ethernet devices are found. Remove one of them. Press ESC to continue. |
|
1802 Error |
01CA | More than one Wireless LAN devices are found. Remove one of them. |
|
|
0200 | Hard disk error-The hard disk is not working. |
|
|
021x | Keyboard error and two short beeps. | Run interactive tests of the keyboard and the auxiliary input device. | |
0220 | Monitor type error-Monitor type does not match the one specified in CMOS. | Load Setup Defaults in BIOS Setup Utility. | |
0230 | Shadow RAM error-Shadow RAM fails at offset nnnn. | System board. | |
0231 | System RAM error-System RAM fails at offset nnnn. |
|
|
0232 | Extended RAM error- Extended RAM fails at offset nnnn. |
|
|
0250 | System battery error-System battery is dead. |
|
|
0251 | System CMOS checksum bad-Default configuration used. |
|
|
0252 | Password checksum bad-The password is cleared. | Reset the password by running BIOS Setup Utility. | |
0254 | System NV7 Volume checksum bad- Default configuration used (two short beeps) | Turn off the computer and discharge CMOS. Then restart the computer. | |
0260 | System timer error. |
|
|
0270 | Real-time clock error. |
|
|
0271 | Date and time error-Neither the date nor the time is set in the computer. | Run BIOS Setup Utility to reset the time and date. | |
0280 | Previous boot incomplete-Default configuration used. |
|
|
02F0 | CPU ID:xx Failed. |
|
|
02F4 | EISA CMOS not writable. |
|
|
02F5 | DMA test failed. |
|
|
02F6 | Software NMI failed. |
|
|
02F7 | Fail-safe timer NMI failed. |
|
Errorcodes Bereich 1xxx
Error code | Symptom | FRU or action, in sequence | Siehe auch |
---|---|---|---|
1802 | Unauthorized network card is plugged in-Turn off and remove the miniPCI network card and two short beeps. |
|
1802 Error |
1803 | Unauthorized daughter card is plugged in-Turn off and remove the daughter card. |
|
|
1804 | Unauthorized WAN card is plugged in-Power off and remove the WAN card. |
|
1802 Error |
1805 | Unauthorized Wireless USB card is plugged in-Power off and remove the Wireless USB card. |
|
|
1820 | More than one external fingerprint reader is attached. Power off and remove all but the reader that you set up within your main operating system. | Remove all but the reader that you set up for the authentication. | |
1830 | Invalid memory configuration-Power off and install a memory module to Slot-0 or the lower slot. |
Note: For the construction of the DIMM slot, see DIMM removal and installation - ThinkPad T400, R400. |
Errorcodes Bereich 2xxx
Error code | Symptom | FRU or action, in sequence | Siehe auch |
---|---|---|---|
2000 | Hard Drive Active Protection sensor diagnostics failed.Press ESC to continue.Press F1 to enter SETUP |
|
|
2010 | Warning: Your internal hard disk drive (HDD) may not function correctly on this system. Ensure that your HDD is supported on this system and that the latest HDD firmware is installed. | Inform the following information to the customer: If in the primary bay the customer is using a non-IBM or non-Lenovo hard disk drive (HDD), or an old generation IBM HDD which is not supported by this system, with the risk in mind, the customer can still use it by pressing ESC. If in the primary drive bay the customer is using a supported IBM/Lenovo HDD with an old firmware, the customer needs to update its firmware to the latest. The latest version is available at Lenovo Support & downloads. | 2010 Error |
2100 | Initialization error on HDD0 (Main hard disk drive) |
|
eine Lösungsmöglichkeit im Lenovo-Forum |
2102 | Initialization error on HDD1 (Ultrabay hard disk drive) |
|
|
2110 | Read error on HDD0 (Main hard disk drive) |
|
|
2112 | Read error on HDD1 (Ultrabay hard disk drive) |
|
Symptome ohne Piepton
Symptom or error | FRU or action, in sequence | Siehe auch |
---|---|---|
No beep, power-on indicator on, LCD blank, and no POST. | 1. Make sure that every connector is connected tightly and correctly. 2. DIMM. |
|
No beep, power-on indicator on, and LCD blank during
POST. |
1. Reseat DIMM. 2. System board. |
RAM-Steckplatz bei T30, R3x, X3x |
The power-on password prompt appears. | A power-on password or a supervisor password is set. Type the password and press Enter. |
|
The hard-disk password prompt appears. | A hard-disk password is set. Type the password and press Enter. |
|
The DOS full screen looks smaller than it should. | Start the ThinkPad Configuration program (F1 at Boot-time) and set the Screen expansion function |
LCD Symptome
Symptom or error | FRU or action, in sequence | Siehe auch |
---|---|---|
No beep, power-on indicator on, and a blank LCD during POST. | System board. | |
|
1. Reseat the LCD connectors. 2. LCD assembly. |
Sicherung für Hintergrundbeleuchtung durchgebrannt |
|
1. See important note for “LCD-related symptoms.”1) 2. Reseat all LCD connectors. |
Flexing |
Horizontal or vertical lines displayed on LCD. | LCD assembly. |
1) Zitat aus dem Hardware Maintenance manual:
- A bright dot means a pixel is always on (white or color.) A dark dot means a pixel is always off (black color.)
Numerische Fehlercodes (ThinkPads vor 2001)
Symptom or error | FRU or action, in sequence | Siehe auch |
---|---|---|
10X
101: Interrupt failure. |
|
|
110 (Planar parity.) |
|
Hardware Maintenance Manual |
111 |
|
Hardware Maintenance Manual |
11XX 1101: Serial_A test failure. |
|
|
12XX 1201: Serial_B test failure. |
|
|
158 (The hard disk password was not set even though the supervisor password is set.) |
Set the password for the hard disk drive. | |
159 (The hard disk password is not set the same as the supervisor password.) |
Set the correct password for the hard disk drive. | |
161 (Dead battery.) |
|
|
163 (Time and date were not set.) |
|
|
173 (Configuration data was lost.) |
|
|
174 (Configuration error: Perform “Checking the Installed Devices List” (siehe rechte Spalte) before changing any FRUs.) |
|
Hardware Maintenance Manual |
175, 177, 178 175: EEPROM CRC #1 error. |
|
|
17XX 1701: Hard disk controller failure. |
|
|
183 (Incorrect password entered at the supervisor password prompt.) |
Have the user examine the password. | |
184 (Power-on password check sum error.) |
Reset the power-on password in Easy-Setup. | |
185 (The startup sequence is not valid. Suspect that power was off when the startup sequence was being updated.) |
Reset the startup sequence in Easy-Setup. | |
186 | System board | |
188, 189 (BAD EEPROM CRC #1. An incorrect checksum of the EEPROM is received.) |
System board | |
190 |
Go to “Checking the Battery Pack” in Hardware Maintenance Manual. | Hardware Maintenance Manual |
191XX (PM initialization error.) |
System board | |
192 |
|
|
193 (RF Antenna has been removed.) |
|
|
194 (The computer is carried through the portal gate.) |
Type the correct Supervisor Password at the password prompt. |
|
195 (The configuration read from the hibernation area does not match the actual configuration.) |
Check if the configuration was changed. For example, check if the DIMM card is added. | |
196 (A read error occurred in the hibernation area of the hard disk drive.) |
|
|
199XX (Resume error.) |
System board | |
1XX | System board | |
2XX 201: Memory data error. |
|
Hardware Maintenance Manual |
225 (Unsupported memory module.) |
|
|
301, 303, 304, 305, 3XX (301: Keyboard error.) |
|
Hardware Maintenance Manual |
601, 6XX (601: Diskette drive or controller error.) |
|
Hardware Maintenance Manual |
602 (Diskette read error.) |
|
Hardware Maintenance Manual |
604 (Unacceptable ID was read from the diskette drive.) |
|
Hardware Maintenance Manual |
2402 | TV Out Card | |
24XX (2401: System board video error.) |
System board | |
808X 8081: PCMCIA presence test failure. (PCMCIA revision number also checked.) |
|
|
860X (Pointing device error when TrackPoint is disabled.) |
|
|
861X (Pointing device error when TrackPoint is enabled.) |
|
|
I9990301 I9990302 |
|
|
I9990303 (Bank–2 flash ROM check sum error.) |
System board Other codes not listed above. |
Hardware Maintenance Manual |
Undokumentierte Fehlercodes
Symptom or error | FRU or action, in sequence | Siehe auch |
---|---|---|
00127 Nach CPU-Upgrade (Thinkpad 600, 770 etc), kann das Bios den L2-Cache der CPU nicht initialisieren |
BIOS "Hack" - siehe rechts |
Weblinks
- siehe auch Wiki-Artikel Fehlersuche bei ThinkPads
- Numeric error codes - ThinkPad R400, T400
- Numeric error codes - ThinkPad 770
- Beep and no beep symptoms - ThinkPad 560X
- Beep and no beep symptoms - ThinkPad General
- Beep and No beep symptoms - ThinkPad R500
- Phoenix BIOS beep codes
- FRU-Codes am Beispiel ThinkPad 560x